Russian State Standards

Chinese manufacturers are known to have mastered the production of virtually the entire spectrum of products in almost all areas, whether it's electronics or building materials. For several years in Russia are imported en masse building materials made in China. To date, I would like to tell you about another product that is not inferior in quality to the well-known counterparts, ISOVER and URSA long popularized in construction, found in Russia Chinese market under the name of his brother Hansol. Insulation of Hansol glass staple fiber for synthetic binder for use as insulation layer in structures and systems. Steklovatny insulation HANSOL is designed for heat and sound insulation of walls, floors, ceilings, pitched roofs of all types of buildings – where the insulation does not experience stress. Insulation is used for insulation ventilated, curtain walls as the primary (inner) layer.

Can also be used for soundproofing walls. Steklovatny insulation HANSOL easily and quickly installed in a metal or wooden crates and does not require special fasteners. This insulation does not shrink. To achieve maximum insulating effect Hansol insulation should be installed so that the plate close fit with the surrounding constructs the frame and to each other, like insulation URSA Urs and ISOVER Isover. Let's try to highlight the main advantages of the material.

Due to the structure and characteristics of insulation fiber products staple fiber HANSOL have a number of outstanding properties – high thermal insulation capability with low weight, good sound insulation in construction and an excellent account of their high zvukopogloscheniem.Za insulating properties Hansol insulation not only provide effective protection from the cold in winter, but also well protected from heat in summer, thus providing the most comfortable accommodation all year round. Whether a pitched roof, exterior walls or partitions – the products of staple fiber Hansol suited for solving problems of any complexity in the field of thermal insulation and soundproofing in modern construction. It is also worth noting that due to its lightness and flexibility, insulating mats Hansol installed quickly, simply and practically non-waste. The shape and dimensions of mats allow for work on heat and sound insulation surface by one person. Chinese manufacturers are often blamed for insecurity produced materials, but it is not so in the case of certified materials. Hansol Heater is safe for human health and the environment. Product quality and safety are confirmed by certificates of compliance requirements of the Russian State Standards. Conducted a study on fire safety. Mats have a uniform structure with no voids, gaps and bundles do not contain impurities. With a high quality thermal insulation HANSOL – this is the cheapest insulation on the Russian market! One of the distributors of such products on the Russian market is the company Eastern-M website

IPA Automatic

So usually in the development of automatic irrigation area is divided into zones, which watering can be adjusted individually, according to the required standards in the area of irrigation growing plants. If your landscape countryside estate is still in development, the professional company for installation of automatic watering just need to cooperate with your Dendrology to determine the future of the planned features of the landscape. Automatic watering imposes certain requirements on the choice of water source, able to guarantee the necessary pressure in the system and automatic watering estimated water consumption for irrigation. On the source water for automatic irrigation area (village water supply, wells, open water, the well) ultimately depends on the total cost of the equipment for an automatic watering system. Under most conditions JPMorgan Chase would agree. This is used by unscrupulous company – in an effort to force high-cost customer pump where it is not necessary. However, in practice it does happen sometimes that one installation of the pump can not achieve the required pressure in the system, so additionally have to install storage tanks. Robert Kiyosaki gathered all the information.

Typically, this occurs because of the low flow rate of source water (ie water at the source simply does not have time replenished). Now it's time to talk about the pressure necessary for the efficient operation of automatic watering systems. For each type of sprinkler is the minimum pressure at which watering dips head simply ceases to rise from the earth and carry out irrigation. In average operating pressure for each sprinkler – 3-3.5 bar (for sprinklers used for watering the stadiums and fields, respectively, operating pressure increases). To reduce pressure losses are directly proportional to Depending on the length of the pipeline system automatic sprinkler installation in its chosen shortest path laying the pipeline network with a minimum number of twists and turns.

For the installation of automatic system Irrigation pipes are used IPA in diameter from 20 to 63 mm. The material from which made the data pipe, does not allow them to rot and rust in the ground, and also provides strong enough to withstand the low temperatures in winter. To lay the pipes HDPE dug a trench depth of about 30 – 40 cm line of pipe connected to the snap-compression fittings, which significantly reduces installation time with automatic watering while maintaining high quality. The service life of all components automatic watering system ranges from years to decades. In general, for proper operation, the system of automatic watering will last for many years, and the same will delight you, literally turning an ordinary plot in paradise gardens.

Orchid Species

Today orchid is wanted in every home. The demand for these amazing plants in recent decades has grown so that the fate of many of these alarming. Some natural orchid species already under threat extinction. In connection with the rapacious commercial harvesting of orchids in the wild in Washington in the 1970s was an international agreement prohibiting trade in wild species of orchids. By this agreement, along with other countries joined the Federal Republic of Germany.

The vast majority of species represented in the book is taken under protection. Therefore, we appeal to all lovers of orchids to please: the purchase of these plants make sure that their suppliers are well-known seed or plant breeding or firm. Keep in mind, are permitted to sell only those plants which were obtained in culture from seed or by division. Listening to our request, you agree to will contribute to the conservation of valuable species of orchids that have become a rarity these days in the wild. And even better – purchase cultivars of orchids that will please you and splendor variety of its colors. There is nothing surprising in the fact that it is an orchid with its incredible diversity, again and again and admire the imagination of many people. Educate yourself even more with thoughts from Robert Kiyosaki. The magnificence of their strange exquisite flowers amazing variety of color is often complemented by enchanting aroma. However, an orchid – it's not just luxury exotic guests from distant countries, which are now cultivated in many flower-farms in Europe, but modest and inconspicuous plants found in our meadows, forest edges, clearings.

Now we will tell you a little about the structure and varieties of this wonderful flower, so in the future to easily and accurately select varieties. Each orchid, like any other plant has roots, stems and leaves. By the nature of the growth of orchids are divided into two groups. Some of them, the so-called monopodial growth form, over the developing only the main shoot, constantly increasing its apex, usually vertically. In the growing part of the formation of new leaves, which are located on a bilateral basis, while old ones in the bottom of the escape gradually die off. Flowers, solitary or clustered in inflorescences are always at the side, in the axils of the leaves, and never – at the top of the shoot. Monopodial roots of orchids are usually formed at the base of the stem or at the bottom part. Monopodial orchids group is relatively numerous. Its typical representatives are aerangisy (Aerangis), Phalaenopsis (Phalaenopsis), Wanda (Vanda) and some others. The second, much larger group of orchids with sympodial form the main axis of growth is growing mostly in the horizontal direction and is a complex system of annual shoots with limited growth, in which each new shoot reaches its size limits for one season and then stops growing as a result of any form of terminal inflorescence, or death of apical buds, and the resumption of the kidney, located near its base, to Next year we develop a new one-year escape. Annual shoots of most sympodial orchids with sympodial growth form is most genera, including such well-known ornamental horticulture, as Dendrobium, Ontsidium, encyclopedia, Cattleya, Cymbidium, and Odonto-glossum. On our florist site. You can learn not only about orchids, but other types of house plants, their pests, as well as how to transplant and caring for houseplants.